05 chevy equinox

Home / the12volt's Install Bay / Car Security and Convenience / 05 chevy equinox (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

northern

Copper - Posts: 154

Joined: November 04, 2005

Location: United States

Posted: February 28, 2007 at 10:30 AM / IP Logged

I did a few searchs on this vehicle and no one had the exact problem.

I did an autostart with this vehicle and when you remote start the vehicle the security light and the "wrench" light comes on in the dash, they stay on while you drive the vehicle.

When you start the vehicle with the key, those 2 lights do not come on.

The autostart and bypass kit works perfectly.

Any ideas what it could be?

I hooked up the accessory 1 wire, ignition wire, 12 volts wire. I did not hook up a starter wire.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 28, 2007 at 2:35 PM / IP Logged

PLEASE NOTE: This vehicle is equipped with PASSLOCK 2 passive anti-theft. Many modules are available to bypass this security for remote start. If one is not available to you, use the security diagram for bypass instructions. IMPORTANT: If check engine light comes on during remote start, connect keysense wire.

Back to Top

northern

Copper - Posts: 154

Joined: November 04, 2005

Location: United States

Posted: February 28, 2007 at 3:58 PM / IP Logged

Customer is comming in next week, I will give that a try. Astrochart didn't mention much about the keysense..

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: February 28, 2007 at 4:51 PM / IP Logged

Yes, definitely needs keysense.

If your product only has one ground-when-running output, be sure to split it with two diodes, then connect one diode to keysense, and the other to your bypass module.

If you omit the diodes, the bypass will be activated even when the car is started with the key, and the bypass module will never get a chance to "re-learn" as time goes by. It'll work OK for a good while, but the car will come back later.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 28, 2007 at 10:34 PM / IP Logged

northern wrote:

Customer is comming in next week, I will give that a try. Astrochart didn't mention much about the keysense..

I find that odd as well...maybe you could call Astro tech support and let them know what you found...(if the solutuon works) They would be happy to get the free info.

Back to Top

customak47

Copper - Posts: 164

Joined: October 25, 2005

Location: Vanuatu

Posted: March 01, 2007 at 8:34 AM / IP Logged

depending what bypass you used, I ran into an issue with the bypasskits that you have to program the bypass with the doors all closed, so leave the driver door open, but latch the door latch closed. then program bypass and this will take care of the security light.

My rifle is my friend...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 chevy equinox

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.