fiberglass cover

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fiberglass cover (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

silentblackhat

Copper - Posts: 138

Joined: January 14, 2005

Location: New Brunswick, Austria

Posted: March 09, 2007 at 6:06 PM / IP Logged

I see in the post that shows "how to make a fiberglass enclosure" he has the actual enclosure, makes it semi-smooth, covers it with tape/foil and then makes a cover for it....im wondering, why not just smooth out the actual enclosure and then paint that? why make an enclosure then a cover for it?

I am kind of new at fiberglassing enclosure that are fancy looking so im just wondering, any info or advice is appreciated

Back to Top

Search for other posts by silentblackhat

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2007 at 8:10 PM / IP Logged

AS I stated in the post :

I did this because I wanted a flush look for the amplifier and the subwoofer. I couldn't flush the amplifier because the mounting holes were wider than the face of the amp. By making a cover peice I was able to cover the screws and flush the amplifier face.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

cyrus4566

Member - Posts: 1

Joined: February 25, 2007

Location: United States

Posted: March 13, 2007 at 3:07 PM / IP Logged

Say, Jeff, it's a beautiful project!!! I'm just confused about one aspect - Is the cover actually attached to the enclosure or does it just sit on top of it? Thanx.

Cyrus4566

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fiberglass cover

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.