the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hid degrades fm radio reception


Post ReplyPost New Topic
< Prev Topic Next Topic >
timvan 
Member - Posts: 14
Member spacespace
Joined: May 29, 2002
Location: Georgia, United States
Posted: March 19, 2007 at 7:12 AM / IP Logged  
Hello..
I just installed a "plug and play" HID kit on my 2004 Avalanche..When the lights are on the radio looses most of its reception, local stations only come in.
I have tried to move the ballast, ground the ballast to chassi, I even used another set of ballast... all to no avail.
I am unsure if it is coming through the wiring or is a RF problem..
I am at a loss on how to resolve this...any and all help greatly appriciated!!
Thanks,
Tim
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 19, 2007 at 8:43 AM / IP Logged  
Have you tried using another set of HID's from another manufacturer ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
timvan 
Member - Posts: 14
Member spacespace
Joined: May 29, 2002
Location: Georgia, United States
Posted: March 19, 2007 at 9:04 AM / IP Logged  
no, the company that I purchased these from is sending out another set of ballst (different manufacture) to try. I have read about this on several different GM vehicles..Im not hte first with this issue.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 23, 2007 at 12:43 PM / IP Logged  
I have the same problem with my 06 civic. Vision HID's. As the ballasts warm up it gets a bit quieter....but still the noise is there. ???
timvan 
Member - Posts: 14
Member spacespace
Joined: May 29, 2002
Location: Georgia, United States
Posted: March 23, 2007 at 12:46 PM / IP Logged  
I wrapped the leads to the lamps with braided copper insulation from a local electronics store...it has helped a lot
minitruckin_jay 
Member - Posts: 9
Member spacespace
Joined: December 02, 2004
Location: Ontario, Canada
Posted: April 12, 2007 at 4:01 PM / IP Logged  
i have a new subaru wrx and had the same problem, i tryed wrappin the balas in electrical tape and it worked some how

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer