the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

791vx, 93 honda del sol


Post ReplyPost New Topic
< Prev Topic Next Topic >
nbboy7 
Member - Posts: 19
Member spacespace
Joined: July 09, 2006
Location: United States
Posted: March 24, 2007 at 2:04 PM / IP Logged  
Ok here goes I installed my viper 791 alarm today everything works but the shock sensor. I check all the conection and its fine. I don't know what it can be i did the troubleshoot to turn the key on and off but it still didn't work. I also have a question when I remote start the car the lights stay flashing is there a way to turn that off or is it not reading mt Tach. If it help I installed it on my 93 Honda del sol Si If any one can help I'll galdly apprecate it. Thank you
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: March 24, 2007 at 2:14 PM / IP Logged  
Flashing lights: This is how DEI systems come from the factory, set to flashing parking lights while remote started. This is a programmable option listed in your installation manual.
Shock Sensor: Does the LED on the impact sensor light up at all? The sensor will light up even when the alarm is disarmed any time it senses an impact. If it is not lighting up at all, I would make sure both ends of your harness are plugged in tightly. If it lights up but not without a really strong impact, then adjust the sensitivity of it by turning the adjustment screw.
Installer, IT support, and FFL. I need less hobbies.
nbboy7 
Member - Posts: 19
Member spacespace
Joined: July 09, 2006
Location: United States
Posted: March 24, 2007 at 2:40 PM / IP Logged  

For the flashing lights I do not know how to program the vallet parking mode.  The  manual was not very clear.  If you can kind of break it down.  Now for the shock sensor it does not light up at all. 

nbboy7 
Member - Posts: 19
Member spacespace
Joined: July 09, 2006
Location: United States
Posted: March 24, 2007 at 4:04 PM / IP Logged  
Thank you very much you helped with the info u were able to give me and I got it to work.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 11, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer