the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Retro Fit Auto Dimming mirror


Post ReplyPost New Topic
< Prev Topic Next Topic >
phezmann 
Member - Posts: 3
Member spacespace
Joined: February 08, 2003
Location: United States
Posted: February 08, 2003 at 4:20 PM / IP Logged  

I have a 1994 Dakota and am installing a Gentex Auto Dimming mirror out of a 1997 Ford Explorer.  I need some help.  The wiring harness on the mirror  has 5 wires,  the colors are aranged in order of 1-6.  RED / yellow;    GREEN/ yellow;     black;       BLACK/ pink;         WHITE/ purple;      open.      I need to know what this wires are for.  THis mirror was ripped out of a 1997 explorer, wire was cut, so I have no harness end.  The gentex and Moto website are no help.  Somedbody PLEASE help me!!!!

Thanks,

Chad 

1994 Dodge Dakota V8 4x4 SLT Club Cab--- A project truck with some awesome stuff.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: February 08, 2003 at 9:34 PM / IP Logged  

Ok this is basically what I have found online.  First the two links are for the mirror but for different vehicles.  Use this one to identify what pins are what  http://www.p71interceptor.com/gentexmirror/.  Then use this as a diagram as what to look for http://www.mmsport.s5.com/Compassmirror.html.  Basically the pins "should" be the same but the wire colors may be different.  You will have to tear down the mirror to find the plug on the mirror and take the wiring harness that is going into the mirror and figure out what wires are what from what pin and the diagram from the first link should hopefully supply you with the wiring info you will need.  On the first power up use a really small fuse just in case.  You also might want to look at a chiltons and see if it has the wiring info for the mirror.  Also here are a couple of other links that I found: http://www.audiworld.com/tech/int33.shtml  http://www.mitocorp.com/mirror_installation.htm  Hope this helps.

Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, October 17, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer