bmw e39 custom sub enclosure

I would recommend the other side of the trunk for easier access to the fuse panel and battery in the future.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

The best advice is to go slowly and plan it all out. All the mistakes I make are due to rushing. So go slow, make sure everything is right. When making the mold, be sure to lay enough glass on it so that it is very strong, the stronger the better. another tip is to draw a line with a sharpie where you want the edges to be before you lay your glass, then the line will transfer to the glass making it easier to cut. then when you trim it with a dremel, be very precise as this determines how well the edges of your peice will look. use a router to make a mounting ring from MDF and postion it with dowels and hot glue/ca glue. stretch the fabric as tightly as you can( another reason to make the mold very strong.)  apply resin making sure you soak throught the fabric so that it will stay attatched when you trim off the excess. apply a few layers of glass. then do your mixture of resin/ body filler, sand, and finish to your liking.