the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

speed sensor wire 95 accord


Post ReplyPost New Topic
< Prev Topic Next Topic >
lil_joker2k2 
Copper - Posts: 119
Copper spacespace
Joined: June 19, 2002
Location: United States
Posted: April 11, 2007 at 7:12 PM / IP Logged  
Hello everyone. Does anyone know the speed sensor wire for a 95 accord EX?? I'm trying to calibrate my navigation but it won let me without tapping into that wire. any help would be appreciated.. THANK YOU!!
yescolumbus 
Member - Posts: 3
Member spacespace
Joined: March 19, 2007
Location: United States
Posted: April 17, 2007 at 9:34 PM / IP Logged  

FYI, This is what I found for 00 Accord.

VSS Wire: LOCATION 4- 31 PIN CONNECTOR AT ECM

VSS Wire Color: BLUE/WHITE
VSS Pulse: 4000
VSS Tach Wire: LOCATION 16- ON DISTRIBUTOR
Tach Signal Wire Color: YELLOW /GREEN

https://www.the12volt.com/installbay/forum_posts.asp?tid=81739&KW=accord+vss

Yes! Columbus!
lil_joker2k2 
Copper - Posts: 119
Copper spacespace
Joined: June 19, 2002
Location: United States
Posted: April 19, 2007 at 12:25 AM / IP Logged  
I found the wire. Its orange. Everyone kept telling me to get it from the ECU but i couldnt test the wire correctly, so what i did was take apart the guage cluster and test the three orange wires on the plugs. The way you can find the VSS wire is you get a volt meter, ground it, then touch the wire u want to test, put the car on drive ( dont give it gas, common sense) you should get a voltage increase. and thats how u find your VSS wire ( at least for hondas)
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: April 19, 2007 at 10:36 AM / IP Logged  
Easiest way to find it on this cars is to go to the cruise control module left of steering column, ( orange) But I see you already found itspeed sensor wire 95 accord -- posted image. There is also only one orange wire. Behind the cluster is on a 16 pin connectter pin C12.
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer