amplifier goes into protection

Home / the12volt's Install Bay / Car Audio / amplifier goes into protection (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: April 23, 2007 at 1:39 PM / IP Logged

if it was coming out of the subwoofer out on the HU then it was LPF, then at the amp it was HPF which means that it was probably offsetting the signal and nothing was happening.

Although, this would really have nothing to do with the amp going in to protection, it would just mean that you have a weird signal going to the woofer.

LPF 80Hz @12db/oct+ HPF 120Hz @12db/oct = ________

Back to Top

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: April 23, 2007 at 5:16 PM / IP Logged

oooh i dont know then why the amp was going into protection. i did raise the frequency too. maybe that was but so far it has not gone into protection... another question is it worth it to buy the expensive RCA cables as compared to the cheaper ones or it doesn't matter.

Confidence is the key to any project!!

Back to Top

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: April 26, 2007 at 5:57 PM / IP Logged

its weird but when i put the amp on LPF and on 100 hz i dont hear it as loud as if i were to leave it on 100 hz and put the amp on full or HPF

Confidence is the key to any project!!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amplifier goes into protection

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.