custom fitting component speakers

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / custom fitting component speakers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nutt

Member - Posts: 14

Joined: November 23, 2006

Location: Canada

Posted: April 18, 2007 at 3:22 AM / IP Logged

Hey couple q's for you all..I have a set of kenwood excellon component speakers with the tweeters that come with and im lookin into customisin them into my front door panels.(93'Grand Cherokee Limited)

My question's are...

1}I have tweeters in the dash! Should I disable those if I want the new ones in the doors above the components seeing as the new ones won't fit right into the dash there would have to be more modifying done?

2}Running through the crossover that was included would i run the tweeter & speaker to the crossover then just the crossover to the stock speaker wiring?

and last off if you have any pointers on how to keep the modification as stock as possible could you help me out because otherwise im lookin to just fiberglass a section for it all to work out for me!!

thx for whatever info to anyone who can help me out

Just a rookie out to learn some more

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: April 18, 2007 at 8:00 AM / IP Logged

1) I would disable them (ie unplug them) to add the new component's in the doors.

2) Yes. The vehicle does not have crossovers in it.

Tip. If you are planning to place the speaker's in a custom setup, I would place them in the kick panels with the tweeter mounted right below the woofer. Ideally they should be aimed at the opposide side's B-pillar top.

Ganbatte ne!

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

nutt

Member - Posts: 14

Joined: November 23, 2006

Location: Canada

Posted: April 21, 2007 at 5:10 PM / IP Logged

Yeah i was planning on unpluggin the stock ones and the component system comes with a crossover that i have to wire the tweeter and speaker through!!

Just a rookie out to learn some more

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

custom fitting component speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.