chdl7 pk2 07 ram

Home / the12volt's Install Bay / Car Security and Convenience / chdl7 pk2 07 ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

danh0ward

Member - Posts: 12

Joined: September 03, 2004

Location: United States

Posted: April 20, 2007 at 6:20 PM / IP Logged

I installed one of these today and everything is ok except.... when the vehicle is running in RS mode and you turn the key to the run position it grinds the starter.

fyi it is a 2500 diesel mfg date 11/06

please help. appreciated in advance.

Dan Howard

Back to Top

danh0ward

Member - Posts: 12

Joined: September 03, 2004

Location: United States

Posted: April 21, 2007 at 11:31 AM / IP Logged

one more thing, Im using a "key in the box" transponder insteaded of the one on the chdl7 pk2. I dont think that would cause said problem, but thats why Im on here asking. thanks

Dan Howard

Back to Top

b2reptile

Member - Posts: 26

Joined: December 02, 2006

Location: United States

Posted: April 21, 2007 at 2:16 PM / IP Logged

How did you interface with the start/accessory wire? Did you use relays and resistors? It should only crank the starter when it sees 180 ohm resistance on the PURPLE / brown 2nd start/accy wire. Make sure that turning the key cylinder to accy or run doesn't trip the starter relay again.

Back to Top

danh0ward

Member - Posts: 12

Joined: September 03, 2004

Location: United States

Posted: April 23, 2007 at 10:38 AM / IP Logged

the chdl7 pk2 does everything. the install is easy. all you run to the ign harness is 3 wires. 1 data for locks, 1 for ist ign and 1 for the 2nd starter. what I think I might try is hook up a relay to isolate the key side of the 2nd ign from the chdl7 pk2 mod while remote starting/GWR wire. I guess it cant hurt. thanks

Dan Howard

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

chdl7 pk2 07 ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.