amp remote turn on routing

Home / the12volt's Install Bay / Car Audio / amp remote turn on routing (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

brandonklassen

Member - Posts: 6

Joined: April 29, 2007

Location: Canada

Posted: May 04, 2007 at 10:28 PM / IP Logged

I just want to know which side of my car i should put the remote turn on cable for my amp? The side with the power wire or the side with the RCA's?

HU:Sony Xplod CDX-GT500

Speakers:2-6.5" Sony Xplod

2-6x9" Sony Xplod

Amp:Rockford Fosgate P2002

Subwoofer:SonyXplod xs-L123P5B

Back to Top

Search for other posts by brandonklassen

wlmpwlmp

Copper - Posts: 59

Joined: December 20, 2006

Location: Canada

Posted: May 05, 2007 at 4:52 PM / IP Logged

run that trigger down the same side as your power cable. the RCAs should run down a side all by themselves.

WesMan

Back to Top

duct tape

Copper - Posts: 125

Joined: May 18, 2006

Location: United States

Posted: May 05, 2007 at 10:24 PM / IP Logged

it doesnt make a difference, i have taped the remote wire to rca cables to make running them at the same time easier. never had a noise issue from doing so.

its not really a big deal to seperate your main power wire from your rca anymore. it used to be a big deal back in the day when radios didnt have alot of voltage on the rca preouts. i still seperate them when i can because its the "proper" thing to do, but sometimes it cannot be avoided.

Back to Top

mando2155

Copper - Posts: 74

Joined: April 03, 2006

Location: United States

Posted: May 05, 2007 at 11:35 PM / IP Logged

If you have an aftermarket radio your REM is a low current wire,200ma or so. It shouldnt create any noise if you run it with your RCA cables. Like duct tape said the proper way is power on one side, signal on the other but technology has come a long way.

Back to Top

brandonklassen

Member - Posts: 6

Joined: April 29, 2007

Location: Canada

Posted: May 06, 2007 at 3:27 PM / IP Logged

o.k thanks

HU:Sony Xplod CDX-GT500

Speakers:2-6.5" Sony Xplod

2-6x9" Sony Xplod

Amp:Rockford Fosgate P2002

Subwoofer:SonyXplod xs-L123P5B

Back to Top

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: May 06, 2007 at 6:12 PM / IP Logged

I've ran all the wires from the front to the back on one side of my old car and NEVER had any noise problems or anything feedback at all.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp remote turn on routing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.