clifford proximity sensor/viper 5000

Home / the12volt's Install Bay / Car Security and Convenience / clifford proximity sensor/viper 5000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

spaspecker

Copper - Posts: 59

Joined: September 07, 2006

Location: United Kingdom

Posted: May 06, 2007 at 5:56 AM / IP Logged

hi guys - i've recently acquired a proximity sensor and want to wire it into my viper 5000. The front of the sensor has "clifford proximity sensor III" on it and the connector is 3 pins. The problem I have is that my alarm has 2 extra senor inputs but they are 4 pin connectors? can anyone help me out or point me in the right direction?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 06, 2007 at 4:51 PM / IP Logged

I thinhk 3 was digital, if not connect red-red black-black, join green and blue to orange. Will not show as adual zone(ie internal only, not external) with no warn away.

spaspecker

Copper - Posts: 59

Joined: September 07, 2006

Location: United Kingdom

Posted: May 07, 2007 at 3:25 AM / IP Logged

sorry - should have mentioned that I don't have the 3 pin connector for the proxy sensor, just the sensor itself so I don't know which wires go where, I'm going to try and bodge together a connector but need to know the connections (i.e. pin 1 red, pin 2 black etc.)

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 07, 2007 at 10:20 AM / IP Logged

When alarm is connected and powered up, one the terminals (marked MUX) sits on 12v+ and an other on ground, connect red and black to these two, then connect orange to either of others and see what happens, a,lternative connect to trunk feed on alarm (blue) and diode separate. Or, look at Viper manual, it might give you pin configuaration.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford proximity sensor/viper 5000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.