2006 ford five hundred

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2006 ford five hundred (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

madmx

Member - Posts: 11

Joined: February 08, 2006

Posted: May 26, 2007 at 4:41 PM / IP Logged

I am trying to install a alarm/starter. My problem is I have found the dome supervision wire + to detect the door(s) are open. The lights will stay on for some time when the doors are locked and the alarm thinks that door is open and set the alarm off. How do I prevent the alarm from seeing the dome supervison temorarly so the alarm will not go off?

Back to Top

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: June 02, 2007 at 1:46 AM / IP Logged

Usually you can program your alarm /remote start to ignore the dome light signal until it turns off. Look through your manual for the programming.

wire4veins

"D"

Precision Autosound - Owner

MECP Master Installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 ford five hundred

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.