audiobahn amp and subs

I have a Audiobahn A2300HCT amp and 3 12” Audiobahn Aluminum Subs. What is the best way to hook them up I’d like to get nice deep bass.

What impedance woofers do you have?2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Not only that, but connection has nothing to do with how deep the woofers play, it's the enclosure. Woofer model numbers, please...It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

They are the ALUM12Q , 1000 RMS, dual 6 ohm

Audiobahn CLAIMS you can bridge it to a 1 ohm load... for 2400 watts... I am dubious, at a minimum... If that's TRULY the case, wire all 6 voice coils in parallel, and bridge the amplifier to it. Easy-peasy.It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

  I had this amp, it has 4  40 amp fuses in it.  My calculator tells me 2300 watts is the max output this amp can possibly  produce.  the amp does   not     put out what Audiobahn claims, but its still got decent power.  How ever its my opinion ( and experience)  that there subs wont handle as much power as they claim either.  I dont remember seeing anything that said this amp is 1/2 ohm stable in stereo so im not sure if 1ohm bridged will work for long, but  i ran 1 ohm stereo no problem on a pair of 12" L7s for a while.  On paper,   according to audiobahn  do what Haemphyst said, hes usually got great advice.

thx guys