the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 scion xb wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: June 17, 2007 at 10:38 AM / IP Logged  
Can't seem to find the rs wiring info for a 2007 Scion XB. It does not seem to be the same as an 06. Any help would be greatly appreciated.
captainzab 
Silver - Posts: 606
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 09, 2005
Location: United States
Posted: June 17, 2007 at 2:22 PM / IP Logged  
i dont got the 07 either, i guess your going to have to test each wire then write them down.
or
you could try using any 07 toyota (if they did change colors for the XB, then there should be another toyota that also got the change)
Note: You Always Dont Get What You Pay For.
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: June 17, 2007 at 11:19 PM / IP Logged  
Only difference I see in the 2007 according to Victory Technology is that the ign 1 is RED / black and the rest are the same for that vehicle.  Not saying that Victory is right but thats what it shows.  Just make sure that your main priority is to power up all ign wires to avoid check engine lights.
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: June 18, 2007 at 8:52 AM / IP Logged  
I made a mistake. It's an 08.
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: June 18, 2007 at 5:40 PM / IP Logged  

My program shows this for the 08,

  • 12v=white(+)
  • ign=gray(+)
  • Starter=white(+)
  • ign2=white(+)
  • starter2=white(+)
  • acc=black(+)

If installation excellence is right then you MUST test all these connections with the meter.  I am assuming you know how to test the ign,acc, and starter.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer