1991 honda civic dx wire problem

so those two white wires (direction indicator) .. you can use just ONE of those to connect to the RED / green civic parking light wire. it does not matter which one you use. 

This system has what's called an "anti-grind" feature, hence the relay.  If you want to connect that, do the following:

Find the civic starter wire, cut this wire in half. You will now have TWO ends, a keyside and a motor side:

The keyside of this cut wire, connect to the 87a terminal wire on the relay provided.

The motor side of this wire connect to terminal 30 of the relay provided.

Terminal 86 of this relay should be connected to the civic ignition wire (BLACK / YELLOW)

As far as the Green alternator wire, i still think this must be connected to the WHITE/ black civic 12 volt constant wire to do voltage sensing.

What are the instructions for programming this module or teaching it voltage sensing?  Can you scan those as well?

That learning functions is to program a new transmitter to the brain... it does not refer to the voltage sensing.

Are there any other pages that refer to initial remote starting? What does pages 1 through 7, 9, and 11 and beyond talk about?

wow... no offense, but I would not feel comfortable installing this in my car -- looks REAL sketchy/cheesy.

Best of luck -- lemme know if you run into any snags... which I'm sure you will (not because I doubt your ability, but b/c I doubt this product)