dodge 2002 stratus, factory amp

you can get to the output side of the amp, or you can just turn the amp on at the harnes on the radio. The best thing to do ( or what I would do) is get yourself a tone generator. Look at the colors of the harnes at the back of the radio, then find those colors at tha amp. Then unplug the OTHER harness at the amp. Ythis will be the outputs from the amp to the speakers. 1 pair at a time, with the tone generator make the speakers talk to ya. A tone generator does just what the name implies. After you have identified all the "pairs" of speaker leads, you get to run wires from the outputs of the deck to the wires you identified at the amp outs. Use a DMM to ohm out the individual wires to make sure you get the polarity correct.   OR

heres for the coupe, the above is for the sedan!