the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

What Material To Make Speaker Adapters?


Post ReplyPost New Topic
< Prev Topic Next Topic >
the12volt 
Administrator - Posts: 3,955
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: July 06, 2007 at 2:58 PM / IP Logged  
BTW, Kydex cuts so much easier and cleaner than ABS and unlike ABS it doesn't melt and glob-up when you cut it. I use an eighth inch drill bit in a pneumatic die grinder for inside cuts and my table saw for exterior straight cuts.
What Material To Make Speaker Adapters? - Page 2 - Last Post -- posted image. the12volt • Support the12volt.com
ohlarikd 
Copper - Posts: 56
Copper spacespace
Joined: January 04, 2006
Location: United States
Posted: July 06, 2007 at 4:00 PM / IP Logged  
The Kydex looks really good. Except I can't seem to find it in anything less than a 4' by 8' sheet. I am sure you can by it in that size since you use it all the time and will make use of it.
Looks like its a very rigid, easily machinable material.
Derek
the12volt 
Administrator - Posts: 3,955
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: July 06, 2007 at 4:12 PM / IP Logged  
Again, try finding a local supplier. Often the one down here has half sheets and smaller available.
What Material To Make Speaker Adapters? - Page 2 - Last Post -- posted image. the12volt • Support the12volt.com
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 1, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer