celica indicators

Home / the12volt's Install Bay / Car Security and Convenience / celica indicators (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

eireal

Member - Posts: 48

Joined: May 17, 2006

Location: Ireland

Posted: July 19, 2007 at 11:05 AM / IP Logged

Theres no white plug near the fuse box,altho i got most connections in the loom centre section heading back to the p/brake.

At rest IE non flashing,the indicator wires read 12v,but on flash they go to ground,hence why i grounded the WHITE/ red.

Are you positive the WHITE/ red should go to 12v?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 19, 2007 at 4:15 PM / IP Logged

This may be similar to the hiace van, look at plug behind hazard flasher switch. If it has a GREEN / WHITE at pin 10, ground this through a test light, if it does the trick, ground WHITE/ red, join the whites, then to this wire,this will do the trick.

Back to Top

eireal

Member - Posts: 48

Joined: May 17, 2006

Location: Ireland

Posted: July 20, 2007 at 5:58 AM / IP Logged

Cheers howie ill give it a try thanks for your help

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

celica indicators

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.