06 ram door trigger

Home / the12volt's Install Bay / Car Security and Convenience / 06 ram door trigger (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: July 22, 2007 at 11:46 PM / IP Logged

Just about completed an install on 564T in 2006 Dodge Ram 2500 and I am having trouble locating the large gray plug at the cluster for the door triggers as stated in the wiring diagram. I have found the driver door in the driver kick but I want to avoid going to each kick - does anyone have a tip on this?

Thanks,

Gary

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 23, 2007 at 9:50 AM / IP Logged

Did you remove the instrument cluster from the dash ? It's the only gray plug on the back of the cluster

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: July 23, 2007 at 7:21 PM / IP Logged

No, is it easy to remove? How do I remove it?

Gary

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 23, 2007 at 11:13 PM / IP Logged

Remove the cluster bezel from the instrument panel.

Remove the four screws (3) that secure the instrument cluster (2) to the instrument panel structural support (4).

Pull the instrument cluster rearward far enough to access and disconnect the three instrument panel wire harness connectors (1) from the connector receptacles on the back of the cluster housing.

Remove the instrument cluster from the instrument panel.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: July 23, 2007 at 11:32 PM / IP Logged

Many thanks, Jeff

Gary

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: July 30, 2007 at 4:25 PM / IP Logged

use a data module onthese it greatly reduces installation time the xk 532 provides doorlock security bypass and output for alarm also doess transponder.

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 ram door trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.