the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

12 not thumping why?


Post ReplyPost New Topic
< Prev Topic Next Topic >
96gtp 
Member - Posts: 16
Member spacespace
Joined: July 20, 2007
Location: Canada
Posted: August 18, 2007 at 10:42 AM / IP Logged  
Will give that a try.
96gtp 
Member - Posts: 16
Member spacespace
Joined: July 20, 2007
Location: Canada
Posted: August 20, 2007 at 12:57 AM / IP Logged  
Was talking to someone today and they told me that since one of my voic coils is at 1 Ohms and the other is at 3.8 Ohms that that would dontate that I have a Blown SUb. IS this true?
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: August 20, 2007 at 12:22 PM / IP Logged  
means you may have one messed up coil...the other coil should be fine to use...I wired my friends sub(same as yours) using one coil and its been fine for a couple years...not problems
jvillefinest 
Copper - Posts: 255
Copper spacespace
Joined: December 29, 2003
Location: Florida, United States
Posted: August 22, 2007 at 3:17 PM / IP Logged  

push on it! in and out...if you get any resistance or any "crunchy" it toast. thats what it sounds like...if its still good there....try the drill battery trick...hook the speaker wires to the + and - of  a drill battery and see if you cant get it to move. Try it both ways and see if it will move in and out...if it does then its still good...i will be suprized if it does.

2007 Acura TSX
SQ setup in the works
96gtp 
Member - Posts: 16
Member spacespace
Joined: July 20, 2007
Location: Canada
Posted: August 23, 2007 at 5:42 PM / IP Logged  
jvillefinest wrote:

push on it! in and out...if you get any resistance or any "crunchy" it toast. thats what it sounds like...if its still good there....try the drill battery trick...hook the speaker wires to the + and - of a drill battery and see if you cant get it to move. Try it both ways and see if it will move in and out...if it does then its still good...i will be suprized if it does.

yeah it is crunchy when I push in and out on the speaker. I guess it is done. :-(
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, January 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer