2007 chevy suburban, factory camera

Trying to keep the factory camera to be use with avic z1100%Guatemalan

check out the gm- unlock from g-net it unlocks the factory nav screen so that you can watch video while driving very cool!!Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

This is from a Tahoe, but it may be the same. Looks like there is a 16 pin @ the back of the OEM radio with a pink (pin 6 +) and a light blue (pin 7) wire which is the video feed from the OEM camera. Also in that same plug pin 5 dark/green white is your VSS. I'm not sure if the OEM radio turns on the camera or not. The cam is controlled from a small metal box under the pass seat. I BELIEVE it is always on and the oem radio just switches and shows the signal. So with that logic you would just have to solder an RCA on to those two pins and plug it into your input and try it. If it comes on great your set to go if not, you probably need to figure out a way to turn on the module/camera. Also not sure if the OEM radio or the control box actually flips the image, but I'm thinking the control box. Mike