valet 712t horn

Home / the12volt's Install Bay / Car Security and Convenience / valet 712t horn (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

coollerpad

Member - Posts: 4

Joined: July 17, 2007

Location: United States

Posted: August 09, 2007 at 3:13 AM / IP Logged

I had Valet 712t installed on 2001 Toyota Corolla... but did not connected the horn wire... i'like to connect it to the Chirper/Siren instead... there is one red and one black wire from the chirper... how to connect it... Please Help!

Back to Top

frans-c

Copper - Posts: 77

Joined: February 14, 2006

Location: South Africa

Posted: August 09, 2007 at 6:08 AM / IP Logged

I just installed my Valet 712T this morning! Also connected my car's horn. Here's how you should connect your siren using a regular SPDT relay, assuming it activates by switching to ground:

#85 & #87 Fused 12V

#86 Brown input wire from 712T module

#87a Ground

#30 To siren's live wire

If your siren activates by switching to 12V, use the following relay setup:

#85 & #87 Fused 12V

#86 Brown input wire from 712T module

#87a Not used

#30 To siren's live wire

Hope it helps!

F R A N S

1985 Mercedes-Benz 230E

320 000 km / 199 000 miles

Full MB Service History

Back to Top

coollerpad

Member - Posts: 4

Joined: July 17, 2007

Location: United States

Posted: August 09, 2007 at 9:13 AM / IP Logged

So... the...

#87a connect to BLACK from the chirper

#30 connect to RED from the chirper ?

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: August 09, 2007 at 9:37 AM / IP Logged

I'm too lazy to download a manual for the 712t, so I am going to assume the 'horn' output wire is a (-) signal.

Black from 'chirper' to ground.

Red from 'chirper' to 30 on a relay.

86 and 87 of relay to a 5 amp fused constant 12v.

85 of relay to (-) horn output of 712t.

Back to Top

coollerpad

Member - Posts: 4

Joined: July 17, 2007

Location: United States

Posted: August 09, 2007 at 11:04 AM / IP Logged

Thanks frans-c... and ... JWorm very much for the info! Will see if can get it to work.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 712t horn

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.