the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clifford matrix 1


Post ReplyPost New Topic
< Prev Topic Next Topic >
gaujaai 
Member - Posts: 2
Member spacespace
Joined: September 05, 2007
Posted: September 05, 2007 at 6:43 AM / IP Logged  
I have a 1998 Subaru Legacy 4 door that I purchased used about a yeay ago. It came with a clifford matrix 1 (I believe frrom the shape of the remote, like a fat hourglass has three buttons, one large on top and two smaller ones below it). There is a red LED on the dash that says clifford, and the valet switch has two little buttons one plain and one with a star). Everything was fine until a few days ago. The alarm was set to what I believe valet mode when I got it as the LED was on all the time. All of a sudden the alarm is armed and I can't get it back to valet mode using all of the procedures in the manual I downloaded! I am tired of the alarm going off everytime I open the doors! Also I haven't seen any manuals that describe the valet switch as two buttons. Any help would be appreciated, an install manual would be great! I did down load the RS 1.1 manual but I am not sure if this is the same as the Matrix 1?
Thanks
swamprat323 
Gold - Posts: 1,333
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: September 05, 2007 at 8:55 AM / IP Logged  
is the batttery good in the remote
gaujaai 
Member - Posts: 2
Member spacespace
Joined: September 05, 2007
Posted: September 05, 2007 at 9:53 AM / IP Logged  
Hmm, It does unlock the doors and chirps the alarm so I believe it is good.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 07, 2007 at 4:07 PM / IP Logged  
thats not a Matrix 1, but an earlier model..   check the brain for the exact model #... the Matrix 1 did not use the 2 button valet switch....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
swamprat323 
Gold - Posts: 1,333
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: September 08, 2007 at 11:28 AM / IP Logged  
you may have the arrow model that the only thing that comes to mind for the plain view valet switch

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, November 30, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer