the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 kia sedona, aps 997


Post ReplyPost New Topic
< Prev Topic Next Topic >
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: September 06, 2007 at 4:37 PM / IP Logged  
i installed a prestige APS 997 in an 06 Kia Sedona 6 months ago and for some reason now everytime they lock the doors the drivers door makes a buzzing noise and everytime they unlock the passenger door makes a noise any idea what it can be.. everything works and they do unlock and lock they just make noise now..
Confidence is the key to any project!!
rtperformance 
Member - Posts: 17
Member spacespace
Joined: August 13, 2007
Location: United States
Posted: September 06, 2007 at 9:26 PM / IP Logged  

dose this all so happein from the switch or just when you use the system?

eurobink 
Copper - Posts: 55
Copper spacespace
Joined: September 06, 2007
Location: Florida, United States
Posted: September 07, 2007 at 12:05 AM / IP Logged  
its simple.. 06 sedona is a 20 min install. drop the dash panel and all connections are in your face.. i don't see an installer error here.. more like KIA workmanship shining thru..  ive been doing work for 2 kia dealers for the past 6 years.. like the other reply, does it happen from door switch too? im sure it does.. it's a simple negative pulse.. you couldnt replicate the problem on the next sedona if you tried.
catalin capota 
Copper - Posts: 74
Copper spacespace
Joined: December 28, 2005
Location: British Columbia, Canada
Posted: September 08, 2007 at 3:30 AM / IP Logged  
The door lock actuators are most likely faulty.
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: September 09, 2007 at 9:45 PM / IP Logged  
It does do it with the switch i just wondered because its an almost new car..
Confidence is the key to any project!!
catalin capota 
Copper - Posts: 74
Copper spacespace
Joined: December 28, 2005
Location: British Columbia, Canada
Posted: September 09, 2007 at 10:17 PM / IP Logged  
Unfortunately it seems like the actuator in that door is faulty, but the fortunate thing is that it's under warranty.
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: September 10, 2007 at 6:53 PM / IP Logged  

the alarm doesn't cancel the warranty

Confidence is the key to any project!!
rtperformance 
Member - Posts: 17
Member spacespace
Joined: August 13, 2007
Location: United States
Posted: September 16, 2007 at 12:03 AM / IP Logged  
I really dont think it  is the bran new actuators. my guess is the lock puls duration or the puls its self set the brain to a shorter duration and or try to relay isolate the door locks then look at the actuator. (If it works form the car but not form the remote it must be thew remote.) 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, October 20, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer