the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

can't get rid of alternator whine


Post ReplyPost New Topic
< Prev Topic Next Topic >
SFVautosound 
Member - Posts: 26
Member spacespace
Joined: November 01, 2004
Location: United States
Posted: September 23, 2007 at 11:05 PM / IP Logged  
DYohn wrote:

SFVautosound wrote:
DYohn wrote:
You're not trying to use any of the Bose gear are you?
Yep. Linelevel out from Avic D3 to linelevel in on Bose amp. Why?

Because that's probably the source of the noise: a ground loop between the HU and the Bose amp.  Get rid of the amp and see what happens.

Ok, I figured it might be that. I fixed the broken wire today (temporarily) and the whine is mostly gone, I have to do some better testing (went to the track today) to see if I can hear it anymore. As to bypassing the bose amp...I probably have to make my own bypass cable, correct?
Owner
SFV AutoSound
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer