spacer spacer spacer spacer

1993 crown victoria false triggering

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 2
Member spacespace
Joined: September 29, 2007
Location: Missouri, United States
Posted: September 29, 2007 at 4:15 PM / IP Logged  
I just purchased a Crimestopper CS-2002 DPII alarm system. I have put it in a 93 Ford Crown Victoria LX w/o keyless entry. I am having problems with it false triggering after an hour or two. My dash LED flashes brightly and steadily after I arm it, and I've tried changing the programming options to see if that was the problem, such as the dome light delay, but it still false triggers after a couple of hours. I have tried completely turning down my shock sensor to see if it helps, it don't. I went with a positive door trigger per the wiring diagrams provided on this site. I have it spliced directly into the dome light BLACK/ Lt. Blue (+) wire. I also have my trunk trigger wire spliced into the BROWN / White (-) trunk pin wire. I don't have a multimeter handy so I can't tell what polarity things are, just going by the diagrams. Could you possibly help with the door/trunk trigger, since these seem to be the only other problems I could think of or help me figure out what could be the problem with this alarm. Everything is hooked up and working properly (at last I think so) except this false triggering problem. Please Help, I am completely stumped!
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 30, 2007 at 9:12 AM / IP Logged  

I would bet on NOT having a meter might have something to do with your troubles. You need to get one.... borrow it if you have too.

Disconect the trunk trigger. Test. Then reconnect it, disconnect the door trigger. Test. See if eliminating one of these solves your problem

Get a meter!!!!!

Member - Posts: 2
Member spacespace
Joined: September 29, 2007
Location: Missouri, United States
Posted: September 30, 2007 at 10:58 PM / IP Logged  
I figured it out. Got a multimeter. It was my trunk trigger, no wire from trunk read ground when open so I cant use my trunk trigger until I figure it out.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 01, 2007 at 1:04 AM / IP Logged  
Wire directly to trunk light.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, August 19, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer