the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 bmw need idea for custom box


Post ReplyPost New Topic
< Prev Topic Next Topic >
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: October 09, 2007 at 3:44 PM / IP Logged  

hello everybody please help me if you can  i'm working on a 05 bmw x5  the car has 2 spot on rear  where i can mount  a 10 inch woofer

which i did i only use the left side but the sound is not good it only vibrate the bass is very bad i put a peace of board on the back of cover to make stronger .

trying to find out how can i insulate so i can get a good sound or make any box   please respond asap thanks

jose

jmsounds

boogienights 
Member - Posts: 7
Member spacespace
Joined: July 09, 2007
Location: United States
Posted: October 09, 2007 at 5:02 PM / IP Logged  

Dynamat will help elimiate the vibration and increase db's.

Perfection is the only standard.
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: October 11, 2007 at 2:47 PM / IP Logged  

the thing is there are some wires and the factory amp is below  i was thinking if there is way insulate bettter

or making a box in the hole in there

tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: October 11, 2007 at 3:28 PM / IP Logged  
Get the JL stealth box for that vehicle. It would be cheaper, cleaner and vibrate less then something that has to be custom built.
There is no such thing as free installation!
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: October 12, 2007 at 10:55 AM / IP Logged  

tcss do you know where can i purchase this box does anybody sells to retail 

thanks jose

tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: October 12, 2007 at 12:14 PM / IP Logged  
Where are you?
There is no such thing as free installation!
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: October 12, 2007 at 2:47 PM / IP Logged  

i'm in fort washington md i just open a shop but i know that jl only sells it to authorized dealers

jose

tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: October 12, 2007 at 7:34 PM / IP Logged  

That is correct, you need to get it from a JL dealer. I was only suggesting it because by the time you pull down the panel and make a fiberglass enclosure you probibly will spend more on time and materials then the Stealth Box would cost. Bite the bullet on the box and make money on the rest of the job.

Congrats on your new store. Hope it's a success.

There is no such thing as free installation!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, January 22, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer