Distorted View

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Distorted View (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

PimpP495

Member - Posts: 13

Joined: February 14, 2003

Location: United States

Posted: February 19, 2003 at 11:23 PM / IP Logged

I have an in-dash monitor, I have installed an noise filter to reduce the noise coming from the alternator. The noise is reduced, but now sometimes when Im riding the monitor starts to jump and becomes distorted. It later on goes away, what causes this. Are my RCA cables too close to the wires that power and control the monitor....

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 20, 2003 at 9:01 AM / IP Logged

Could be a poor ground, power wires too close to video RCA wires or poor quality RCA's. Check all these and post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Distorted View

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.