First time trying this......need help

Home / the12volt's Install Bay / Car Security and Convenience / First time trying this......need help (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: February 20, 2003 at 7:15 PM / IP Logged

Recently purchased an Executive 3000 keyless entry system and am going to try to put it on my wife's 85 Bonneville

For the constant 12 volts-I need to hook it to the Large red wire at the ignition harness,right?This car has 2 of the on this harness,which one do I use?

The system has two wires for the dome light,one with a fuse and one without,I dont understand hoe to hook these up either

Any info would be greatly appreciated

Thanks,Allen

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: February 20, 2003 at 11:37 PM / IP Logged

BONNEVILLE 1985 Printer Friendly Version

WIRE COLOR LOCATION

12 VOLTS CONSTANT RED(2) IGNITION HARNESS

IGNITION 1 PNK IGNITION HARNESS

ACCESSORY /HEATER BLOWER 1 ORG IGNITION HARNESS

STARTER PUR IGNITION HARNESS

PARKING LIGHTS BRN(+) AT LIGHT SWITCH

DOMELIGHT WHT(-) AT PIN SWITCH

PWR DOOR LOCK L BLU DRV KICK PANEL

PWR DOOR UNLOCK BLK DRV KICK PANEL (TYPE A)

TRUNK RELEASE BLK (+) RELEASE SWITCH

TACH SENSOR WHT AT DISTRIB

BRAKE WHT (+) AT SWITCH ABOVE BRAKE PEDAL

HORN BLK(-) STEERING COLM

FACTORY DISARM L GRN EITHER KICK PANEL

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: February 20, 2003 at 11:44 PM / IP Logged

[QUOTE=10nesne1] BONNEVILLE 1985 Printer Friendly Version

WIRE COLOR LOCATION

12 VOLTS CONSTANT RED(2) IGNITION HARNESS

IGNITION 1 PINK IGNITION HARNESS

ACCESSORY 1 ORANGE IGNITION HARNESS

STARTER PURPLE IGNITION HARNESS

PARKING LIGHTS BROWN(+) AT LIGHT SWITCH

DOMELIGHT WHITE(-) AT PIN SWITCH

PWR DOOR LOCK L/BLUE DRV KICK PANEL

PWR DOOR UNLOCK BLACK DRV KICK PANEL(TYPE A)

TRUNK RELEASE BLACK (+) RELEASE SWITCH

TACH SENSOR WHITE AT DISTRIB

BRAKE WHITE (+) AT SWITCH ABOVE BRAKE PEDAL

HORN BLACK(-) STEERING COLM

FACTORY DISARM L/GREEN EITHER KICK PANEL

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: February 21, 2003 at 7:52 AM / IP Logged

Yes,but do I need to hook it to BOTH red wires for the constant 12 volts?

also

Why would the Executive 3000 Keyless entry system have 2 wires to hook to the dome light?One wire has a fuse and one is a straight wire,how would these be hooked up?

Thanks for the help

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 21, 2003 at 8:03 AM / IP Logged

If the unit has 2 12 volt input wires like most systems do, then you will need to use both. If it only has 1 12 volt input wire, then use only one of the red wires. Are you sure the one with the fuse isn't for the PARKING LIGHTS ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: February 21, 2003 at 5:12 PM / IP Logged

Thanks for the reply Jeff

The park light wire has a 10 amp fuse also

I am looking at it now.There are 2 wires for the dome light;

one with a fuse and one straight wire

camino

Copper - Posts: 54

Joined: October 15, 2002

Location: Mexico

Posted: February 21, 2003 at 5:52 PM / IP Logged

i think one is the input and the other is the output,tell us what colors you have in those wire's.

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: February 21, 2003 at 6:28 PM / IP Logged

This is what the manual has:

WHITE/ Black wire-(+-)Domelight supervision select

WHITE/ Black wire-(+-)Domelight supervision output---"-this one has the fuse"

Exactly how are these two wires to be hooked up?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 22, 2003 at 8:45 AM / IP Logged

WHITE/ Black wire-(+-)Domelight supervision select : This is your polarity selector. If your vehicle has a (-) or a (+) domelight trigger this polarity selector will out put whatever your domelight requires.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: February 22, 2003 at 12:04 PM / IP Logged

Do you want the domelight to come on automatically when you unlock the doors? If you don't care for this feature, just leave those two wires unconnected.

If you want illuminated entry, here's how you do it:

Go to the courtesty light under the driver's dash; it'll have two wires-- orange and white. With the door open, the white wire should test as a ground. With the door closed, the wire should test as positive.

Now that you have TESTED and confirmed that your car has negative-switched domelights, set your system up the following way:

"domelight supervision select" gets tied to chassis ground on the car.

"domelight supervision output" gets tied to the white wire at the courtesy light.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.