ready mode problem

Home / the12volt's Install Bay / Car Security and Convenience / ready mode problem (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

habco1

Copper - Posts: 56

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 17, 2004

Location: Saskatchewan, Canada

Posted: October 25, 2007 at 3:51 PM / IP Logged

Has anyone encountered a problem with a Prostart remote starter for a manual transmission kicking itself out of ready mode for no reason. The starter was installed into a 1995 Jetta Diesel. I think it may have something to do with the door trigger but I am not sure. Can anyone help? ready mode problem -- posted image.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: October 25, 2007 at 5:54 PM / IP Logged

"kicking itself out of ready mode for no reason"

can you explain more? when you remote start, does the car nudge forward?

habco1

Copper - Posts: 56

Joined: November 17, 2004

Location: Saskatchewan, Canada

Posted: October 26, 2007 at 11:50 PM / IP Logged

when the owner leaves the vehicle he performs the sequence of events to get the manual vehicle into ready mode. if he leaves the vehicle for a short period of time the car leaves ready mode without any sign of the door opening or anything else. Then it will not remote start.

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 27, 2007 at 1:04 AM / IP Logged

well theres not much to check to find a problem.

1 door pin connection

2 foot brake

3 hand brake.

habco1

Copper - Posts: 56

Joined: November 17, 2004

Location: Saskatchewan, Canada

Posted: October 27, 2007 at 2:15 PM / IP Logged

Ihave checked these. This RS is installed into a 1995 VW Jetta Diesel. The wires are all the ones that were listed in the wire color diagrams. I have heard that this vehicles alarm monitors the doors constantly while the doors are locked. if this is the case it would have to send a signal to the door switch. I am not sure if this is true or not. If this is the case then the remote wire would be getting a second signal from the door switch then thinks the door is open so it leaves ready mode. Has anyone ever heard of this?

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: October 28, 2007 at 11:36 AM / IP Logged

try relay isolate the door triggers mustangs are famous for this it works every tme for me the car is pulseng door triggers to check them not strong enough to trip relay

good luck

kirk

habco1

Copper - Posts: 56

Joined: November 17, 2004

Location: Saskatchewan, Canada

Posted: October 28, 2007 at 11:54 AM / IP Logged

Do you need to isolate all four doors or just the driver door?

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 28, 2007 at 1:04 PM / IP Logged

If the doors are triggering to ground after it's been placed into ready mode, then the OEM alarm will sound. Does this happen ? The only thing that would not trigger the OEM alarm but will cancel ready mode would be the application of the foot brake or the hand brake looses ground.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

habco1

Copper - Posts: 56

Joined: November 17, 2004

Location: Saskatchewan, Canada

Posted: October 29, 2007 at 7:44 PM / IP Logged

The OEM alarm does not sound. The wire I used for the emergency brake,if I remember correctly, switched from positve to negative when the brake is engaged. Was this the right wire to use? ready mode problem -- posted image.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 30, 2007 at 8:55 AM / IP Logged

I used pin 85 on relay 110 at the fuse and relay box under the driver's side dash. Take in mind that this is a Canadian Jetta and it has OEM daytime running lights therefore having the DRL relay in the fuse panel.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.