Pro Start 3300 Orane wire 10 pin connect

Home / the12volt's Install Bay / Car Security and Convenience / Pro Start 3300 Orane wire 10 pin connect (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bt3668

Member - Posts: 13

Joined: February 21, 2003

Posted: February 21, 2003 at 5:03 PM / IP Logged

I am a little confused about the connection of this one wire. I have a 1997 Pontiac Grand Am. Is there a particular wire i should look for to connect this too? or just any negative wire? Any help will be much appreciated Pro Start 3300 Orane wire 10 pin connect -- posted image.

Pro Start 3300 Orane wire 10 pin connect -- posted image.

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 21, 2003 at 5:40 PM / IP Logged

I think that is the ground out when running wire? or when armed? I am not sure but that is what you use to trigger the starter kill relay if I am thinking about it right. If you have a three wire relay harness it should go to the orange wire and then the Red would go to the starter wire key side and white goes to the engine side of the starter wire along with the starter wire output from the 3300.

J Rilla

Owner/Installer

bt3668

Member - Posts: 13

Joined: February 21, 2003

Posted: February 21, 2003 at 5:40 PM / IP Logged

Negative Ground when armed and starting/running output. unsure of where this needs to be connected

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 21, 2003 at 7:05 PM / IP Logged

The 3300 diagram that I have shows a P12 harness... not a P10 harness ? The ORANGE wire is the (-) parking light wire output.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

12voltlover

Member - Posts: 16

Joined: April 29, 2002

Location: United States

Posted: February 23, 2003 at 2:11 PM / IP Logged

the orange wire on the 3300 is ground when running and when armed. you will need it for passlock bypass on your grand am. i think the 97 grand am used passlock 1 so i would recommend a dei 555L.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Pro Start 3300 Orane wire 10 pin connect

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.