the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 silverado, alarm/remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: November 25, 2007 at 9:43 PM / IP Logged  
got another question,if i need to power the brown accesory wire do i use the (-)orange 200ma wire out of the relay satellite and hook it to a relay? just wanting to know this if i need to, remember it is a python 990
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: November 25, 2007 at 9:45 PM / IP Logged  
or do you power the orange and brown acc wires off of the large orange wire out of the relay pack
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: November 25, 2007 at 10:26 PM / IP Logged  
rt4x4 wrote:
got another question,if i need to power the brown accesory wire do i use the (-)orange 200ma wire out of the relay satellite and hook it to a relay? just wanting to know this if i need to, remember it is a python 990
this way
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: November 25, 2007 at 10:29 PM / IP Logged  
ok how would you wire the relay?
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: November 25, 2007 at 10:43 PM / IP Logged  
04 silverado, alarm/remote start - Page 3 -- posted image.
85 - orange from relay pack
86 - +12V
87 - +12V
30 - to brown in ignition harness
personally, i don't hook up the brown accessory wire in the '06 and previous silverados/sierras
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: November 26, 2007 at 9:09 PM / IP Logged  
here is another question, when hooking up the  data wire from the XK01 is there a sequence to go by, do you hook up the harness to the XK01 first or hook up the date wire and then hook up the harness to the module
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: November 27, 2007 at 4:53 PM / IP Logged  

http://www.xpresskit.com/manual.aspx?prodid=XK01

go to that website and download the manual for your platform. it has the programming instructions in there

Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer