2007 gmc sierra classic

Home / the12volt's Install Bay / Car Security and Convenience / 2007 gmc sierra classic (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

uwDawson

Member - Posts: 7

Joined: June 24, 2004

Location: United States

Posted: November 13, 2007 at 2:54 PM / IP Logged

after installing remote start on this vehicle, i am getting a check engine light. has anyone had any experience with this? how should i resolve it?

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: November 13, 2007 at 3:20 PM / IP Logged

Did you power up the second ignition white wire?

Installer, IT support, and FFL. I need less hobbies.

Back to Top

uwDawson

Member - Posts: 7

Joined: June 24, 2004

Location: United States

Posted: November 13, 2007 at 3:27 PM / IP Logged

Thanks, yes I did the white ignition wire. That doesn't seem to be the problem, any other suggestions?

Back to Top

rt4x4

Copper - Posts: 107

Joined: November 28, 2006

Posted: November 13, 2007 at 7:08 PM / IP Logged

when you say power up second ignition wire do you mean connect it? sorry im a rookie

Back to Top

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: November 13, 2007 at 8:21 PM / IP Logged

yes, there should be a white wire that HAS to be powered up when remote starting...most remote starters have a wire for a "5th relay" or "second ignition" if not then you will need to add a relay to power that wire. if it's not connected you can and prob will ruin your tranny after a bit. (not sure how long, never tried to find out, lol)

back to the question at hand, what unit are you useing and what wires did you connect to the main harness of the remote starter? also, did you try to remote start the vehicle efor the white wire was connected or were all if your connections made befor attempting to start it?

Tri County KustomZ

certified installer

Back to Top

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: November 13, 2007 at 8:26 PM / IP Logged

As already asked it will make things easier if you list the make and model of the remote start you are using.

Is the white wire powering up as an ignition or an accessory?

Installer, IT support, and FFL. I need less hobbies.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 gmc sierra classic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.