the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

94 seville, new deck


Post ReplyPost New Topic
< Prev Topic Next Topic >
michael213 
Member - Posts: 34
Member spacespace
Joined: May 20, 2007
Location: United States
Posted: November 14, 2007 at 9:49 PM / IP Logged  
Does neone know the trick to putting in a new deck? Do I have to bypass the boss amp or can I get a wireing kit to come of that amp and go into the deck?
collyn eastham 
Member - Posts: 27
Member spacespace
Joined: November 08, 2007
Location: Texas, United States
Posted: November 15, 2007 at 7:59 AM / IP Logged  
You will need to do an amp bypass. You will also need to go directly to the column for power and acc since the wiring behind the factory radio will "time-out" after a period of non-use and the radio memory settings will be lost each time you get in the car. The car is not difficult for an experienced installer. It is time consuming though, and DEFINEATLY not a DYI car for novices. The BOSE amps?
Collyn Eastham
a.k.a. 300MBQuart
08 HHR Panel
michael213 
Member - Posts: 34
Member spacespace
Joined: May 20, 2007
Location: United States
Posted: November 15, 2007 at 3:55 PM / IP Logged  

have you done one of these before? I got a part coming 2maro for input to the factory amp and i am going to wire that to the new deck, have you heard of this before, and does it work?

slab42 
Copper - Posts: 56
Copper spacespace
Joined: March 18, 2003
Location: United States
Posted: November 15, 2007 at 4:46 PM / IP Logged  

The part that plugs into the amp is simply a 90+ GM harness.  I usually just get a 90+ harness, and 12 pieces of 18-16 ga. wire, 15-20 ft long, and basically extend the GM harness from the trunk to the dash.  You will also need to run an antenna connection from the trunk to the front as well, with an antenna adapter at the end.  I have never heard of the power 'timing out' in these cars.  I have done many 92-95 sevilles/el dorados,  and NONE of them 'timed out'

Like others have said, if you have only done a few decks, this is not gonna be an easy project for you...

michael213 
Member - Posts: 34
Member spacespace
Joined: May 20, 2007
Location: United States
Posted: November 15, 2007 at 4:51 PM / IP Logged  
thank you that is the part i am getting. I am glad to hear that this works. thank you again for all the help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer