04 toyota mr2 spyder brake r/s

So I just tested the wires again and found out RED / white is a switch 12v wire with ignition and that RED / blue turns 12v with ignition and drops to 0 when pressed. Now im sure thats where I need to hook up the relay but I'm having a brain fart and can't figure it out.

so the RED / blue wire turns negative or to nothing? If it goes to ground then wire relay as follows: pin 30 to ground pin 87 to RED / blue wire pin 86 fused 12v+ pin 85 negative trigger crank, or a negative while running out if it rests at nothing then cut the RED / blue wire and connect pin 87a to side at switch and 87 away from switch. Connect the brake wire from remote start as normal I hope this helps. P.S. Did you wire a transponder bypass for the anti theft?The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Allright it worked. Thanks for all the help guys. Its really wierd that dei didn't have anything on this.

sometimes other installers put together can help with weird issues like that. I am glad you got it working.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya