the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

winisd sub selection


Post ReplyPost New Topic
< Prev Topic Next Topic >
supraturbo94 
Member - Posts: 9
Member spacespace
Joined: January 08, 2005
Posted: November 18, 2007 at 11:59 AM / IP Logged  
I'm trying to use WinISD backwards, as I've already glassed a custom, irregularly-shaped sub box and am now trying to find the proper woofer.    The box is long and narrow and about .5 ft^3, with only enough room for an 8" sub. Sub will be driven by 2 channels mono-bridged from a Cadence Q400, giving 200W RMS at 4 ohms.
Here is my transfer function magnitude graph, which I think would point towards the RE8. However, I don't trust the numbers I've input into the driver file for the RE8, since the calculated Vas came out to be about half of what RE claims it should be.
winisd sub selection - Last Post -- posted image.
My other problem is cone excursion. The RE8 Xmax is 12mm and the eD9Kv.2 is 14.1mm, which don't work, and the ID8 D4 V.3 is 15mm which is OK. My amp does not have a sub-sonic filter that I could find.
winisd sub selection - Last Post -- posted image.
So my questions are:
1. Does anyone have a .wpr file for a Resonant RE8 that I could double check against?
2. Should I just go with the Image Dynamics ID8 V.3, since it seems safest from a cone excursion standpoint?
3. If I wire a 4 ohm 2DVC in series to give an 8 ohm load, does that change the power output to the sub?
4. This may be dangerous to ask, but are there any other 8" subs to look at? I tried a couple JL Audios, which gave nice transfer function graphs but only have 7.6mm Xmax, which isn't close.
Thanks
supraturbo94 
Member - Posts: 9
Member spacespace
Joined: January 08, 2005
Posted: December 05, 2007 at 9:28 PM / IP Logged  
Anybody have any feedback to my questions above?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, October 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer