2008 subaru legacy remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 subaru legacy remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 02, 2007 at 7:40 AM / IP Logged

I have a 2008 Subaru Legacy SE

4cyl manual trans

I want to install a remote start in it

what is suggested and does anyone have a wiring diagram as I have been unable to find one

thanx in advance

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: December 05, 2007 at 6:27 AM / IP Logged

The car hasn't changed body styles for a few years. Wiring will be the same as 2005.

https://www.the12volt.com/installbay/forum_posts.asp~TID~84353

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 22, 2007 at 7:15 PM / IP Logged

I need help with wire locations for the following:

factory alarm arm and disarm, tachometer, and parking brake wire

someone please help ASAP

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 22, 2007 at 8:44 PM / IP Logged

What are you installing?

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 22, 2007 at 9:46 PM / IP Logged

it's an ultra start remote start

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 22, 2007 at 10:01 PM / IP Logged

as jworm mentioned, read this post. it has wiring diagram location and colour of wire. look then ask for help if needed. As for the alarm you purchased, ultra starts are good units. have one of my moms car and it works pretty good. decent range.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 22, 2007 at 10:16 PM / IP Logged

Ultra start part #......? I know, I know..... why am I asking, like it matters. It does. I hope you got a unit for manual transmission. (you did ...right?)

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: December 23, 2007 at 12:07 AM / IP Logged

autoneon wrote:

I need help with wire locations for the following:

factory alarm arm and disarm, tachometer, and parking brake wire

someone please help ASAP

Those wires are clearly indicated in the first post I referenced. Here, let me copy and paste them for you:

Tachometer pink to RED / white ac ECM, 34 pin plug, pin 23 or cluster

Notes: The ECM is behind the glove box.

Can also go to a fuel injector under the hood and use the wire that is NOT blue/black (4 cyl), red (4 cyl turbo), or yellow/blue (6 cyl).

Parking Brake gray - sw or driver kick, harness to rear

Factory Alarm Arm brown - dr kick or BIU, 35 pin plug, pin 3

Factory Alarm Disarm yellow/red - dr kick or BIU, 35 pin plug, pin 12

Notes: The BIU (Body Integrated Unit) is to the right of the steering column.

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 23, 2007 at 6:26 AM / IP Logged

The unit is for manual trans

As for wiring, I connected most of the wires except for the ones mentioned above

I'm just looking to find out the exact location of the BIU or what it looks like so I can easily locate it. Or where to look in the driver kick.

Also, would I be able to connect directly to the clutch wire or would I need to use a relay?

Thanx

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 24, 2007 at 10:56 AM / IP Logged

figured out all the wiring but the clutch

anyone know would I be able to connect directly to the clutch wire or would I need to use a relay????

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.