2008 subaru legacy remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 subaru legacy remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 28, 2007 at 6:51 AM / IP Logged

can anyone help with the clutch???

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 28, 2007 at 10:10 AM / IP Logged

neg or positive clutch? if its postive, connect your start wire to the wire that shows 12v when clutch it pressed. if its a negative, wire up a relay.

85 - constant 12v

86 - ground out when running

87 - ground

30 - to wire that shows ground when clutch pressed.

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: December 31, 2007 at 9:16 AM / IP Logged

ok...I got everything figured out

the R/S worked a few times...

now it does not work anymore...when I turn on the car, the led's stay on constantly...read the manual and states it's in service mode...tried to take it out of service mode or reprogram but nothing...the parking lights stay on all the time now even when the car is shut off..checked all the connections and everything is good...

when I press the buttons on the transmitters, the led's just blink constantly

someone please help...is the R/S unit defective?? Ultra Start 1256M

Thanx

autoneon

Member - Posts: 10

Joined: May 06, 2006

Location: United States

Posted: January 02, 2008 at 9:12 AM / IP Logged

I know there's someone here who knows what I am talking about

I hope???????????

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 02, 2008 at 6:48 PM / IP Logged

Back when I installed Ultrastart I saw a lot of units go into service mode and then would not come out of it. Swapping the antenna and antenna cable would fix the problem. Either that, or you are not trying to take it out of service mode using the correct procedure. How are you attempting to do it?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 subaru legacy remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.