door switches

Home / the12volt's Install Bay / General Discussion / door switches (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

brock_fuzzy_69

Member - Posts: 2

Joined: June 04, 2002

Location: United States

Posted: June 04, 2002 at 10:28 AM / IP Logged

well before i can install an alarm into my 96 ranger i need to figure out the problem with the courtesy lights and door buzzer

i do know that it is a special timered and realy controled setup my question is the door switches are they negative or positve? i'd like to think that they are poitive 'cause there are 2 switches going to each one the problem is that the courtesy lights and dinger sometimes come on unexpectedly like while driving down the road or they will stay on when i get out of the truck any advise?

Search for other posts by brock_fuzzy_69

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 05, 2002 at 2:55 PM / IP Logged

Hey brock_fuzzy_69,

The door trigger is BLACK/ blue in the big harness in drivers kickpad and is positive. To avoid dome light delay use seperate left and right negative door triggers. They are yellow/black for drivers door, and gray/red for passenger door. Both wires are negative and found at Generic Electronic Module (GEM), located behind center of dash. Use both wires and diode isolate each. door switches -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door switches

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.