the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

additional chassis battery ground wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
anewman 
Copper - Posts: 52
Copper spacespace
Joined: January 03, 2008
Location: United Kingdom
Posted: November 23, 2008 at 8:40 PM / IP Logged  
I was wondering if there was likely to be any problems caused by adding a wire to connect the chassis and the battery negative terminal. This would be in addition to the chassis -> engine connection, and the engine -> battery connection.
Thanks in advance.
reax222 
Copper - Posts: 220
Copper spacespace
Joined: March 11, 2006
Location: United States
Posted: November 24, 2008 at 1:35 AM / IP Logged  
I haven't had any. I have the stock wire, my winch provides a battery-chassis ground on the very front and I have another wire from the battery to a bolt about 8" from the battery. The more grounds you add, the more paths the voltage has to return to the battery so there should be less potential between spots.
benjiboy 
Member - Posts: 11
Member spacespace
Joined: December 08, 2008
Location: Kentucky, United States
Posted: December 09, 2008 at 10:08 AM / IP Logged  
You really can't have too many grounds. Especially if the factory or other grounds are old and/or questionable.
anewman 
Copper - Posts: 52
Copper spacespace
Joined: January 03, 2008
Location: United Kingdom
Posted: December 09, 2008 at 10:22 AM / IP Logged  
benjiboy wrote:
Especially if the factory or other grounds are old and/or questionable.
Exactly why I was planning to add a new one :)
pro2aria 
Member - Posts: 3
Member spacespace
Joined: June 03, 2008
Posted: December 17, 2008 at 1:10 AM / IP Logged  
True adding additional ground wires provides a larger path for return current to flow back to the battery, but remember that If you upgrade only the ground and are not upgrading the battery positive then any components tied in to the stock wiring are not gaining much if any. Big three upgrade is the best. Once the car is started the alternator produces the supply current, so upgrading the ground from the alternator to the frame is equally important. This is true of the feed wire from the alternator to the battery as well. Might as well since you're already in there.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer