best way to shut off fuel pumps?

Home / the12volt's Install Bay / General Discussion / best way to shut off fuel pumps? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bjamick

Member - Posts: 5

Joined: April 19, 2010

Location: Alabama, United States

Posted: June 09, 2011 at 11:39 AM / IP Logged

This is for a turbo car. It has 2 fuel pumps one will only turn once under boost. This will be done via Hobbs switch. Also I would like to add in a fuel pressure safety switch that will shut off both pumps if there is a failure. The ECM supplies 12V to the pump that will be for just driving around no boost.

So what would be the best way that I can shut off power to both pumps if the fpss see's a problem?

93 mustang coupe

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: June 09, 2011 at 1:59 PM / IP Logged

The ECM should control the pumps.

Otherwise pumps & valves are controlled by the charge light circuit, else an ignition sensing circuit.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

best way to shut off fuel pumps?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.