the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

music mute wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
mwysocki 
Member - Posts: 9
Member spacespace
Joined: July 04, 2004
Location: United States
Posted: July 10, 2004 at 1:25 PM / IP Logged  

Trying to install a handsfree kit for my cell phone (Sony-Ericsson HCB-30).  I have a 2001 Nissan Quest GLE with the built in VCR system.  I believe I have everything else hooked up correctly except I need to "Connect the yellow music mute wire to the car stereo".  I have looked at the back of the radio and there are 3 connectors plugged into the back of it with several multicolored wires in each.  Does anyone know where I should splice this yellow wire?

There is a button on the front of the radio that has a picture of a phone with the word "mute" under it so I'm fairly certain the radio has this capability.  I just have no idea where I should connect this yellow wire.  Please help?

Thanks,

Mike (Houston, TX)

sk8ingsmurf 
Copper - Posts: 198
Copper spacespace
Joined: March 18, 2004
Location: United States
Posted: July 10, 2004 at 3:26 PM / IP Logged  

are you talking about using your stock radio or is it aftermarket? if aftermarket which brand and model is it? thanks

mwysocki 
Member - Posts: 9
Member spacespace
Joined: July 04, 2004
Location: United States
Posted: July 10, 2004 at 4:01 PM / IP Logged  

I am referring to the stock radio/tape/CD changer/VHS system for a 2001 Nissan Quest GLE.

If there is a wire on the radio I can splice into, that would be great.  If not, I'm not sure what I should do with the yellow wire from the car kit.  Can it just be left unattached or does it need to be attached to something to complete some circuit.  As of right now (with the wire just lying there) the car kit is not functioning properly.

Any advice would be appreciated.  I'm about to call Sony support and contact the guy on eBay that sold it to me.  It may be a DOA unit.

sk8ingsmurf 
Copper - Posts: 198
Copper spacespace
Joined: March 18, 2004
Location: United States
Posted: July 11, 2004 at 12:08 PM / IP Logged  

From what I can find it seems like there is no stock mute wire, the only other way Ive heard of doing this was wiring up a relay from your output wire (mute) of the handsfree kit, to interrupt the acc lead into your deck, this would shut off your deck every time but it would start right back up when the call ended, and it seems like the best way of doing it, there have been a few topics on this but Ill try to post them for you.

sk8ingsmurf 
Copper - Posts: 198
Copper spacespace
Joined: March 18, 2004
Location: United States
Posted: July 11, 2004 at 12:10 PM / IP Logged  

here is a pretty good one (the link that someone posted in this link should be really helpful but I thought you might want both)

https://www.the12volt.com/installbay/forum_posts.asp?tid=25839&KW=mute+wire

Hope this helps, make sure you figured out if its a positive or a negative signal coming from the handsfree kit, post back if you need any help with a relay diagram or anything.

mwysocki 
Member - Posts: 9
Member spacespace
Joined: July 04, 2004
Location: United States
Posted: July 11, 2004 at 4:48 PM / IP Logged  

I appreciate the help.  I'm not sure how to do what you are describing but it doesn't sound too terribly technical.

Still a little confused as to why the radio has a phone mute button on the front but no way to access the function from the back.

sk8ingsmurf 
Copper - Posts: 198
Copper spacespace
Joined: March 18, 2004
Location: United States
Posted: July 11, 2004 at 11:17 PM / IP Logged  
If it has the button there is possibly a way to do it, I hate responding sometimes cause I hate to give bad advice but from all of the wiring diagrams Ive seen there is no mute wire, I dont really know, if you want to put in the time just go search for some wiring diagrams, although trust me on some cars its almost impossible to find one (if anybody can find the wiring for a 99 expedition with the mach sound system please tell me now).  The other option is to go to bestbuy or circuit city, any installer in your area, ask to look at a wiring harness for your car, if you find one that says mute on it, look at that and find the pin it connects to and splice into that.
Charles_R_H 
Copper - Posts: 122
Copper spacespace
Joined: May 15, 2004
Location: United States
Posted: July 12, 2004 at 4:24 PM / IP Logged  

No, you do not have to hook up that wire to complete any circuit.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer