Passlock 1 problem

Home / the12volt's Install Bay / General Discussion / Passlock 1 problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drifter-CT

Member - Posts: 7

Joined: January 01, 2005

Location: United States

Posted: January 01, 2005 at 7:07 PM / IP Logged

ok heres the situation the car is a 95 or 96 sunfire. A DEI 555L was used, the car remote starts but the theft light stays on solid all the time, even if you start the car with the key. I thought the 555L might have a problem so I removed it and the light still stays on and the car will remote start as if it did not have passlock. I checked for a resistance and can't get anything. The light is just on solid all the time.

drifter-CT

Member - Posts: 7

Joined: January 01, 2005

Location: United States

Posted: January 01, 2005 at 7:45 PM / IP Logged

ahh my bad this should be in the security forum.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Passlock 1 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.