the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Stripped Seat Bolts


Post ReplyPost New Topic
< Prev Topic Next Topic >
sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: May 13, 2005 at 9:20 AM / IP Logged  
I hope this isn't off topic but..
Okay so I installed my crossovers under my front pass. seat b/c that seemed like a good place to do it.
So I recently swapped out the comp set for a different one and in changing the crosses I was unable to get the seat out.. the front left bolt had ripped off part of the sheet metal that it was attached to when I loosened the bolt and I had to cut the bolt off with bolt cutters...
And then ALL the other bolts I took out.. which I had a heck of a time doing.. all came out with the threads all warped about half-way down.
Now I got my passenger seat back in but the original bolts won't even turn more than about 1/2 way in and I only have three of them... needless to say when I gave the pretty hostess a ride home from work the other night I was quite embarassed b/c her seat flopped around like a fish out of a water.
How do I fix something like this? The only thing that occurs to me is to get new bolts from Home Depot or something and just force them in with an 18v drill or something... but then of course, the seat will never come out again.
What can I do?
"I'm finished!" - Daniel Plainview
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 13, 2005 at 9:36 AM / IP Logged  

You will need to drill out the holes larger and tap the thread so you can use larger bolts. DO NOT use the same size bolts in there again otherwise the same thing will happen. Here's a site that will help you understand what you will need:

http://www.sheldonbrown.com/tooltips/taps.html

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: May 13, 2005 at 9:47 AM / IP Logged  
Let me guess, Nissan truck or SUV?
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: May 13, 2005 at 10:50 AM / IP Logged  
Velocity Motors:
Okay I'm going to say this back to you and tell me if this makes sense:
You're saying that I have to drill out a hole a wee bit bigger than the ones in the car, then use a seperate tool .. a 'tap' ... which will thread a new bolt hole for me? Then I bolt up new bolts matched to the tap?
auex:
A 1993 Toyota Corolla. You have experience with this I take it? Why did this happen? I mean, I've taken out the seats in other cars dozens of times and never ruined the thread not once but 4 times! I mean.. sometimes stuff never fits back together quite the way it did before but I've never *ripped off metal* ... I was quite preturbed. Stripped Seat Bolts -- posted image.
Wow IPods really are retarded aren't they? *EVERYONE* at my gym is suddenly wearing them around their necks now that that stupid $99 thing came out. Every other kid at school has one attached to their hips like its a cell phone in '95. To think I used to consider Apple Computer kinda cute!
"I'm finished!" - Daniel Plainview
bluntster420 
Member - Posts: 2
Member spacespace
Joined: May 12, 2005
Location: United States
Posted: May 13, 2005 at 11:06 AM / IP Logged  
dont be gay, whatever you do
john
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: May 13, 2005 at 11:09 AM / IP Logged  
bluntster420 wrote:
dont be gay, whatever you do
Shut up troll.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer