Upgrade of keyless Entry

Home / the12volt's Install Bay / General Discussion / Upgrade of keyless Entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

namracj

Member - Posts: 12

Joined: May 08, 2002

Location: United States

Posted: May 13, 2002 at 7:55 PM / IP Logged

I'm having no luck installing alarm to work through my keyless system.Alarm is a Guardian model 911-800. Vehicle is a 2002 Subaru Forester. Problem tieing alarm into keyless entry module.Looking for Doorlock power switch & actuator circuits.Wiring diagram vehicle says find (-) pulse wires to trigger unit. Thought I found the correct wires, but unit still arms/disarms with both remote & door switches. I'm working at the harness leading to the drivers door. Do I have to go into the door panel to find correct wires? Can really use so help. Thanks. John.

john

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 13, 2002 at 8:27 PM / IP Logged

Hey John, sounds like your pretty frustrated witht his install already. In the diagram that I sent you, it said that the wires are at the key ( inside the door ) You will most likely have to take the door panel off and wire it straight to the switch ( if you haven't already done so ). Test all the target wires in the switch on the door and apply a ground wire to the target unlock/lock wire to see if this will activate the locking mechanism. Post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

namracj

Member - Posts: 12

Joined: May 08, 2002

Location: United States

Posted: May 13, 2002 at 8:51 PM / IP Logged

Jeff; Your right I'm stumped. At the Remote keyless entry module I found a wire that locks doors when grounded, and one that unlocks doors when grounded. The same wires lead to the door harness. I tried using these in addition to (+) lock, (+) unlock, & (+) unlock other door wires but still no success. The different wiring connections in the alarm instructions aren't very clear, at least to me. I will try to open the door panel and check for more wires. Any other ideas. Thanks for your help. John.

john

veedub

Member - Posts: 4

Joined: May 13, 2002

Location: United States

Posted: May 13, 2002 at 9:11 PM / IP Logged

you might have the wires from the lock motor.....that might be the reason why you can activate the alarm from the door switch

namracj

Member - Posts: 12

Joined: May 08, 2002

Location: United States

Posted: May 13, 2002 at 9:18 PM / IP Logged

Thanks for the imput. I know i've got something hooked up wrong. I guess I'll go into the door panel after the correct wires. I figured I could find them all at the harness and make things easy. John.

john

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Upgrade of keyless Entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.