the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Sub Screws


Post ReplyPost New Topic
< Prev Topic Next Topic >
tampa77 
Copper - Posts: 65
Copper spacespace
Joined: October 09, 2003
Location: United States
Posted: June 28, 2005 at 8:28 AM / IP Logged  

I am installing subs into a custom 3/4 MDF box. Any suggestions or tricks on installation, especially what would be the best screws to use. Two 10" Alpine E series subs. Every other box I have had came w/ subs.

Thanks.

realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: June 28, 2005 at 11:04 AM / IP Logged  
You can use any screws man. I use those little black drywall screws about 1" long or so. Some people use T-nut screws alot of people really like those. I personally just go to wal mart or home depot and use the old drywall ones.
Learning the trade one fiberglass creation at a time!
zezebiah 
Copper - Posts: 55
Copper spacespace
Joined: April 10, 2005
Posted: June 28, 2005 at 2:04 PM / IP Logged  
Depending on if you are bolting down your box (which you should do in most situations) You can also use hex head screws or star point screws. These give you a little more security in knowing that someone will really have to work to get your subs out, if they are stealing them. It also makes it harder for you too. Its a little added insurance I use and it hasnt hurt me in the past. Of course if you arent bolting down the box then the use of these screws is pretty pointless.
Xplorer 
Copper - Posts: 69
Copper spacespace
Joined: June 01, 2004
Location: United States
Posted: July 01, 2005 at 12:01 AM / IP Logged  
I have heard of using hex/star screws for subs before and was wondering where the best place to buy them would be and exactly what type?
Peace
zezebiah 
Copper - Posts: 55
Copper spacespace
Joined: April 10, 2005
Posted: July 01, 2005 at 12:10 AM / IP Logged  
Most home improvement stores will carry them... Some Online I've heard those screws are pretty good. I've used that same type in some form or another in the past.
The only time using these has hurt me was an install i did in a friends car. Thieves tried to take his subs, didnt have the right bit to take the sub out so they just rammed their screwdriver through the sub... It sucked, but at least we had the satisfaction of knowing they didnt get away with the sub.
crzycreations 
Copper - Posts: 52
Copper spacespace
Joined: February 22, 2005
Location: United States
Posted: July 01, 2005 at 11:54 AM / IP Logged  

Here's a website I found, they have a bunch of different security screws and fasteners:

http://www.hudsonfasteners.com/security.htm

-Don't buy it, Build it-

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer