the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Fiberglass work needed


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: June 26, 2006 at 12:08 PM / IP Logged  
Hello,
I am looking for someone in Georgia who can do some minor fiberglass work... I have a set of aftermarket mirrors and they are not meant to fit my truck, however I did some modifying and now they do lol.. However, there is a SMALL gap on the mounting plate that irritates me and I would like it to be filled... I thought about using bondo glass but i didnt know how it'd hold up to the pressure after the mirror is tightened down... Also, if the price is good I would like some door panels worked on lol. If anyone is interested, my email is megagix AT hotmail.com or just reply to this message... Or PM me and I'll give you my cell number...
Thanks,
-Jason
Melted Fabric 
Silver - Posts: 509
Silver spacespace
Joined: October 24, 2003
Location: California, United States
Posted: June 26, 2006 at 2:08 PM / IP Logged  

Have a camera to take a shot of what you are talking about?

It is hard for any of us to say, we can help you if we cannot see the problem.

I have not failed. I've just found 10,000 ways that won't work.
When you do not know what you are doing and what you are doing is the best -- that is inspiration.
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: June 26, 2006 at 2:24 PM / IP Logged  
sure... It'll probably be tomorrow night before I can post pics because of the rain here... But maybe I can get some ideas flowing by describing it...
The mirror uses an adaptor plate that is sits on the door itself and contours to the curve of the door (in my case it's an angle)... My problem is that there is a small gap where a piece of the plate is missing because it was intended for a newer model Dakota... I just want it filled for cosmetic reasons...
lol, ya picture will work better I guess... but maybe someone gets my point... it shouldnt be too hard honsetly..
Thanks,
-Jason
Melted Fabric 
Silver - Posts: 509
Silver spacespace
Joined: October 24, 2003
Location: California, United States
Posted: June 26, 2006 at 2:46 PM / IP Logged  

Well, have you thought of doing the project yourself with assistance from us should you run into any problem?

I say that because, you have all the parts (truck and mirrors).  Also, once you do your first fiberglass project, all the mystery is taken away, and you will be more prone to doing more projects.

I have not failed. I've just found 10,000 ways that won't work.
When you do not know what you are doing and what you are doing is the best -- that is inspiration.
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: June 26, 2006 at 2:54 PM / IP Logged  
it would be nice to do it myself... but I am SO prone to making things 100x worse when I attempt them lol! But I will give it a shot... I'll probably need to make a new thread later on.. But I will be busy at work so it make take some time.. but should the bondo glass be sufficient or would it be better to go to walmart (or where ever) and pick up a MAT and resin? I've never REALLY looked into a fiberglass project but what do I need? I saw a fiberglass CLOTH and a fiberglass MAT at walmart... one looked like a lot of strands of string and the other just a cloth.. does that make a difference? what about the rest? just resine or whatever... haha, I just need to know what to get really.. and then I will give it a shot...
Melted Fabric 
Silver - Posts: 509
Silver spacespace
Joined: October 24, 2003
Location: California, United States
Posted: June 26, 2006 at 5:33 PM / IP Logged  

Read the "sticky" topic in the forum list on How to Make a Fiberglass Enclosure

I have not failed. I've just found 10,000 ways that won't work.
When you do not know what you are doing and what you are doing is the best -- that is inspiration.
sawhit4 
Copper - Posts: 64
Copper spacespace
Joined: June 22, 2006
Location: United States
Posted: June 26, 2006 at 7:11 PM / IP Logged  

Yeah read up at the top of the page, it helps a ton. 

Anyway how big is the gap?  Fiberglassing it may not be the right choice if its very small. 

Melted Fabric 
Silver - Posts: 509
Silver spacespace
Joined: October 24, 2003
Location: California, United States
Posted: June 27, 2006 at 10:50 AM / IP Logged  
Yea, did not even consider that.  What is the status on those pictures of what it is you previously described?
I have not failed. I've just found 10,000 ways that won't work.
When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer