led quadra strobe under glove box

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / led quadra strobe under glove box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rfmcmahon

Member - Posts: 1

Joined: August 10, 2009

Location: Florida, United States

Posted: August 10, 2009 at 6:02 PM / IP Logged

i have dodge ram 1500 sxt and i just bought some LED quadra strobe lights to put under my glove box but i need a power source, a battery powered source. How do i connect the red and black wired to a power source in the truck?

Ryan

t&t tech

Platinum - Posts: 2,610

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 11, 2009 at 6:28 PM / IP Logged

Ground the black on a piece of bare metal connnected to the chassis anywhere under the dash, the red leg, you can either test for a twelve volt source under the dash if you have a meter, if not run a piec eof 14gauge wire from the positive battery teminal, fuse it at five amps as close to the battery as possible!

Insert an on/off toggle switch inline on the power wire from the battery so you can toggle the lights on and off

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led quadra strobe under glove box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.