the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power hid ballast through acc switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 26, 2011 at 11:48 PM / IP Logged  
I need some assistance, here is what I am trying to do.
I want to use a HID ballast that I have, I have a housing for the bulb, and the bulb, I want to mount it to the rear of my vehicle under neath so I can use it as a optional back up light.
I stopped by radioshack and picked up two 12v switches, I needed one for my double din display to bypass the brake switch. So I bought two so I can do what I want with the light.
I am not exactly sure how this would all be CORRECTLY done, but I feel I am pretty smart and could handle this. I just need someone to tell me everything lol. in a way
Right now, I am thinking about running some sort of gauge wire directly from the battery to switch. Then from there to the rear of the truck, this would provide the ballast with 12v, again I am not sure if this is how this would be done, so please assist me. From here the ballast would be grounded to the chassis, the switch would be grounded to the chassis as well.
Is this how it would/should be done? Are any fuses needed or anything?
Thanks
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 27, 2011 at 12:04 AM / IP Logged  
What is the amp rating of the switch you purchased. It should have a rating such as 120V/3A. What is the number before the A?
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 27, 2011 at 2:02 AM / IP Logged  
This looks like the exact switch I purchased, I am too lazy to go look in my truck exactly now.
http://www.radioshack.com/product/index.jsp?productid=3111494&retainProdsInSession=1
So it would be rated at 30 amps? Would this work? Also,what is the correct hook up.
Would HID's heat output melt plexiglass?
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 27, 2011 at 5:57 AM / IP Logged  
12Guage wire from the battery to the input terminal of the switch. Make sure you place a fuse holder fitted with a 10 amp fuse at the battery. Output terminal of the switch is to be connected to the positive wire of your ballast. Ground the ground wire of the ballast.
Ground the ground terminal of your switch.
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 27, 2011 at 2:10 PM / IP Logged  
Why is a fuse needed between the switch and the battery? I am not knowledgeable about this, mind schooling me for a second?
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 27, 2011 at 2:13 PM / IP Logged  
My amp power wire, is 4gauge I beleive and is very thick. It has a fuse holder already in place. Could I just splice my 12gauge wire in next to the 4 gauge wire after the fuse that comes from the battery?
Essentially, I would have two things drawing from the fuse.
Thoughts please?
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 27, 2011 at 3:47 PM / IP Logged  
If you connect a 12Gauge wire to a battery or to a 4Ga. wire that has a 150 amp fuse, you need to properly fuse the 12Ga. wire.  A 150 amp fuse will not protect a 12Ga. wire.  If the wire were to get accidentally grounded, it may catch fire.
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 27, 2011 at 5:25 PM / IP Logged  
Ok, so could I use 16 gauge speaker wire, i can't fine any quality 10-12 gauge wiring in my house. The 16 gauge speaker wire is very nice, its monster gold plated.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 27, 2011 at 5:32 PM / IP Logged  
Do you have any idea how much current your HID draws?
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 27, 2011 at 5:34 PM / IP Logged  
It uses 35watts, is this what your looking for?
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer